Street Lighting from Cannon

Products

Brackets

Side Entry Bracket Arm - Type 3

The Cannon Type 3 Side Entry Bracket Arms are designed for standard industry diameter columns. This bracket is for converting columns to ‘hockey stick’ types.

This bracket is manufactured to fit inside the top of the shaft. These are held in place by grub screws located in the top of the shaft, clamping onto the bracket spigot. This gives a flush finish between the bracket and column shaft.

Brackets are manufactured from mild steel and hot dipped galvanised to BS EN ISO1461.

The industry uses a variety of sizes and variations and Cannon are happy to produce brackets to your specific size.

For your custom-made brackets please refer to the chart below, print out and complete the appropriate sizes.

Part No.	Column Diameter (A)	Spigot Diameter (B)	Height to Light Source (C)	Projection (D)	Uplift Angle	Finish
CTA3001	76 mm	34 mm	500 mm	300 mm	5⁰	Galvanised
CTA3002	76 mm	34 mm	500 mm	500 mm	5⁰	Galvanised
CTA3003	76 mm	34 mm	500 mm	750 mm	5⁰	Galvanised
CTA3004	76 mm	34 mm	500 mm	1000 mm	5⁰	Galvanised
CTA3005	76 mm	34 mm	1000 mm	300 mm	5⁰	Galvanised
CTA3006	76 mm	34 mm	1000 mm	500 mm	5⁰	Galvanised
CTA3007	76 mm	34 mm	1000 mm	750 mm	5⁰	Galvanised
CTA3008	76 mm	34 mm	1000 mm	1000 mm	5⁰	Galvanised
CUSTOMER SPECIFIC SIZE: