Street Lighting from Cannon

Products

Brackets

Tubular Bracket Double Arm - Type 10

The Type 10 Tubular Bracket Single Arm is manufactured to fit over a reducer spigot on the top of the shaft. This allows the bracket to be flush with the column or can be fitted over the shaft.

This bracket can be supplied with a 5mm gusset for additional strength, according to the lamp weight.

Additional measurements required for the Spigot / Pot diameter (B) and the Projection diameter.

Common column diameters (A) are 76, 89, 101, 114, 127 and 139mm.

Common arm diameters are (B) 34, 42 and 48mm.

Brackets are manufactured from mild steel and hot dipped galvanised to BS EN ISO1461.

For your custom-made brackets please refer to the chart below and complete the appropriate sizes.

Part No.	Column Diameter (A)	Arm Diameter (B)	Height to Light Source (C)	Projection (D)	Uplift Angle	Finish
TA6001	76 mm	34 mm	570 mm	300 mm	5⁰	Galvanised
TA6002	76 mm	34 mm	570 mm	500 mm	5⁰	Galvanised
TA6003	76 mm	34 mm	570 mm	750 mm	5⁰	Galvanised
TA6004	76 mm	34 mm	570 mm	1000 mm	5⁰	Galvanised
TA6005	76 mm	34 mm	570 mm	1250 mm	5⁰	Galvanised
TA6006	76 mm	34 mm	570 mm	1500 mm	5⁰	Galvanised
TA6007	89 mm	34 mm	570 mm	750 mm	5⁰	Galvanised
TA6008	114 mm	42 mm	570 mm	1250 mm	5⁰	Galvanised
TA6009	139 mm	48 mm	570 mm	1500 mm	5⁰	Galvanised
TA6010	114 mm	42 mm	250 mm	1250 mm	5⁰	Galvanised
TA6011	114 mm	42 mm	350 mm	1250 mm	5⁰	Galvanised
CUSTOMER SPECIFIC SIZE: